Table of Contents
Advertisement
LP-122/123 Door/Window Detector
The magnetic Door/Window detector is a contact sensor applied on door or window. When
the magnetic contact is opened (broken) or the battery is in low level, the sensor will send
out the signal to main console. The message of the triggered sensor can be read from the
Main Console's LCD display.
Note: Magnet and magnet switch needed to be placed on parallel position (triangle arrow)
to ensure the better setting.
Change the Battery
When the sensor sends the low battery signal to main console, please replace a new
Battery for the sensor, in the meantime the LCD display shown the low battery message
as below.
LP-122 Button Function:
1. Magnet
2. Transmit LED :
3. Magnet Sensor
4. Battery Cover :
63
WINDOW
SENSOR
01
Low battery
21
When the sensor is activated, LED
will light for 1 sec.
Remove the cover and put one 12V
alkaline battery here.
LP-123 Button Function:
1. Magnet
2. Magnetic Switch
3. Transmit LED :
When the sensor is activated
LED will light for 1 sec.
4. Magnet Sensor
5. Battery Cover :
Remove the cover then put one
9V alkaline battery here.
Advertisement
Table of Contents
