Table of Contents
Advertisement
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE OR POWER ADAPTER TO WATER OR MOISTURE
• Read Instructions – All the safety and operating instructions should be read before
operating this equipment. These instructions should be retained for future reference
• Heed Warnings – All warnings on the equipment and in the operating instructions
should be adhered to. All instructions regarding care and operation of this equipment
should be followed.
• Power Sources – Equipment should only be connected to the power supply specified
in the operating instructions or as marked on the equipment.
• Grounding or Polarization – Take precautions that the equipment is properly
grounded. Take note that the power supply is fitted in the correct input jack ( marked
DC 12V ), and auxiliary units ( external siren and strobe light ) are fitted into the correct
external jack points.
• Power-Cord Protection – Keep cable cords and plugs clear of other objects,
particularly at the point where they exit the equipment.
• Cleaning – Clean the equipment by wiping with a soft cloth, ( do not use any abrasive
agents or water ).
• Non-use Periods – Power cords should be unplugged from the outlet when left
unused for a long period of time.
• Object and Liquid Entry – Take care not to drop objects or liquids on any part of the
equipment.
• Damage Requiring Service – The alarm should be serviced by a qualified service
personnel when:
-
The power-supply cord or the plug has been damaged, or
-
Objects have fallen, or liquid has been spilled onto the equipment, or
-
The equipment has been exposed to rain, or
-
The equipment does not appear to operate normally or exhibits a marked
change in performance, or
-
The equipment has been dropped, and/or the enclosure has been damaged.
• Servicing – Do not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to a Qualified Distributor's
Service Personnel.
• System Maintenance – Under normal use your system requires virtually no
maintenance other than regular testing. It is recommended that you test your system
once a week, and replace the batteries at least once every 6 months ( or as needed ).
IMPORTANT NOTE: IF YOU RETURN TO YOUR PREMISES AND FIND THAT THE
ALARM IS IN PROGRESS, DO NOT ENTER, AS A FIRE OR AN INTRUDER MAY BE
PRESENT. GO TO A NEIGHBOR AND CONTACT THE RELEVANT LOCAL
AUTHORITIES FROM THERE.
Important Safety Instruction
2
Advertisement
Table of Contents
