Table of Contents
Advertisement
LP-207 External Siren and Strobe Light
This system included an external siren and strobe light is an optional accessory. The
device is an important deterrent to intruders. When the siren is installed and the system is
set to Arm, it will emit a piercing 115 decibel siren when any sensor is triggered.
( PS : Cord length 35 feet / sound level 115 decibel )
Installing The Device
Choose a location inside your home where the siren will not be plainly visible but can be
heard throughout the house. Also try to install the siren where the cable can be hidden, for
example along a baseboard.
1. To install the device in a place where is not easy to find by the intruder.
2. Connect the wire to the main console terminal block (Marked as OUT, GND point).
3. The red color wire (+) connected to OUT and the white color wire (-) connected to
GND.
.
26
Advertisement
Table of Contents
