Table of Contents
Advertisement
When the password is incorrect, It will introduce Beep ...Warning sound. LCD
display shown as below.
If the password is correct, It will introduce a long Beep sound. LCD display shown
as below.
You can select the arm mode to set as below:
A - AWAY
: Press AWAY button to set " Armed - Away " alert,
(Armed LED always lights on)
H-HOME
: Press HOME button to set " Armed - Home " alert,
( Armed LED always blinks)
* - CODE
: The program will be designed for Central Monitoring use in future
The function is not available at the moment.
NOTE:1. Sensors belong to 24 hours included:
Smoke Detector (LP-118), Gas Detector (LP-125), Panic Watch (LP-117)
Remote Control Handset (LP-119 PANIC button) and Main Console HELP
button.
2. Distinguish A-AWAY and H-HOME mode:
When system is armed in HOME mode, Main console will neglect the
transmission signal from the PIR(LP-120).
Check Function
To press CHECK button to check the memory data you have installed previously
without any password, but you can only review not allow to change the data in 'Check'
Mode. Following with the menu structure as below.
Access
Denied
MASTER
A-AWAY H-HOME * -CODE
00
HOME
SECURITY
Armed
AWAY
00
HOME
SECURITY
Armed
HOME
Check : 0 – T 1 2 3 4 5 6 –P
7 – MSG
8 – DIAL * – CODE
14
Advertisement
Table of Contents
