Table of Contents
Advertisement
LP-119 Remote Control Handset
The key chain Remote Control Handset is a convenient way to arm ( Home / Away mode)
or disarm this system. Before using the sensor, it is necessary to learn into main console.
1. TRANSMIT LED : When press any button on panel, LED will light on
2. DISARM
3. AWAY
4. HOME
5. PANIC
6. BATTERY COMPARTMENT : For 12V alkaline battery
Zone Address Setting
Enter the Installer code and press '1' to start learning sensor into the system, to press
PANIC button for 1 sec, the red LED also light on 1 sec. the main console emits a long
'Beep', LCD panel shows 'Sensor in Memory'. LP-119 has been setting successfully.
To Arm or Disarm with the Remote Control Handset
When system is set in AWAY mode.
63
REMOTE SENSOR
Armed
When system is set in HOME mode.
63
REMOTE SENSOR
Armed
Press the PANIC button, immediately to trigger the alarm.
63
REMOTE SENSOR
01 Panic
LEGEND
: Press this button to disarm the system or clear message
: Press this button to set the system in AWAY mode
: Press this button to set the system in HOME mode
: Press this button will trigger the alarm and activate auto-dialing.
AWAY
HOME
+
25
Advertisement
Table of Contents
