Setting The Antenna; Mounting The Main Console; About Password; Others - Laipac LP-1500 Owner's Manual

Setting the Antenna

Carefully extend the antenna upward in order to maximize the range of communication
between sensors and the Main console.

Mounting the Main Console

The Main Console may be set on a table top, or mounted on a wall. To mount the console
on a wall, follow these steps.
1. Remove the two black rubber pads and store them away for future use.
2. Measure and fix screws into the wall so that the two screws fit into grooves left under
removed pads.
3. Connect all wire connection to the jacks on the back inside. and replace to back
cover.
4. Set the console onto the screws and carefully allow the console to drop into the
groove securely from inside.
About Passwords
This system provides two sets of password for setting the system. A〉 "Install " B〉 "Master "
A〉"Install " : You can use this password to set the system, such as telephone numbers or
record message...etc
B〉"Master " : This password is used for setting " Arm"( Arm away or Arm home) or
"Disarm" the system.
When the system is finished installation, your family members only need to " Arm" or
"Disarm" the system.

Others

We recommend that you install and program the console after installing the other
components (sensors) of the system. This is to ensure that all of the components are
working together properly.
5