Table of Contents
Advertisement
Installing the Motion Sensor
Before installing the sensor, consider the following points:
Mount the sensor at two meters (6-1/2') high for best coverage.
Mount the sensor with a 14 degree downward incline against the wall for optimum
range.
To install the Motion Sensor, please follow these steps:
Take out the screws or double sided adhesive and install the mounting bracket on
the wall. press the ball joint portion into the bracket until it snaps securely.( To secure
the mounting bracket to the wall at 2 meters above the floor).
Put the PIR on the mounting bracket.
Test the sensor by walking within its range. When the sensor is triggered, the red
LED light will flash once for 1 sec..
20
Advertisement
Table of Contents
