The LP-1500 system is designed to be as flexible as possible in order to meet your
present needs, and also to adapt as your needs change. For the reason, we recommend
that you read and consider the following information and plan your system before installing
devices.
Choosing Location
It is important to try and place the Main Console in an area central. This way. It can let all
the sensors transmit signals with maximum efficiency. In additional, The Main Console
must be placed near a power outlet and telephone jack, because the system needed to be
connected with them.
Setting Alarm Zones
Before installation, you shall have the sensors learn into Main Console via system learning
mode of the Main Console. This system allows to install maximum 63 wireless sensors
and 3 wired sensors.
Installing the Back-up Battery
Remove the battery cover of the Main Console and install the backup battery set to ensure
security system in normal operation when AC adapter out of work.
Powering the Main Console
1. Attach the end of the adapter into the connector provided at the back inside of the
console.
2. Locate the AC adapter, plug the AC adaptor to power outlet.
3. Shown as the LCD screen while power on.
Connecting the Telephone Line
To correct the Main Console to the telephone line, Please follow these steps:
1. Locate the two phone jacks on the back inside of the main console. These phone jacks
are marked " Phone " and " Line ".
2. Connect one end of the telephone cord that came with the system into the connector
labeled Line. Connect the other end of that cord into the wall jack.
3. Connect a telephone to the Main Console through the phone jack.
4. Set the back cover and fix it securely. (Before setting the back cover, you need to finish
the Battery and AC Adaptor installation)
Planning For Installation
00
HOME
Disarmed
SECURITY
4