Two-Way Voice Communication; Chime Function For Door Sensor; Lcd "Msg" Message Indicating On Lcd - Laipac LP-1500 Owner's Manual

Two-Way Voice Communication

Operation method: Main console to remote party
When the remote party receive the main console emergency help. In the party phone
can hear the recorded message (which is stored in main console). If you want to
know what happened, press number 4 on the phone then you can communicate
with some people or threaten the intruder via Main Console. If you have finished the
talk, press the 0 button to end the voice communication or automatically exit the
voice communication after 5 minutes.
When you use the function, main console will stop to dial out remains telephone set.

Chime Function for Door Sensor

When system is in disarm status, press the PAUSE button to turn on 'Chime' function.
if the Door sensor (LP-124/LP-123/LP-122) is activating and Main Console unit will sound
'Ding - Dong', LCD shown as below. To press PAUSE button again to turn off
'Ding-Dong' function.
Auto-dialer priority
This system stores up to six (6) telephone numbers in the Main Console. If it is triggered
and alarm is activated, the auto-dialer will call the pre-set telephone numbers and play
your pre-recorded message.
If system is triggered
Burglary help - It will automatically dial phone 4
call sequentially by 3 cycles attempt (4, 1, 2, 3). When telephone
answered, it will playback message 1 and 4 by 2 times (1, 4)
Fire help - It will automatically dial phone 5
call sequentially by 3 cycles attempt (5, 1, 2, 3). When telephone
answered, it will playback message 2 and 4 by 2 times (2, 4)
Medical help - It will automatically dial phone 6
call sequentially by 3 cycles attempt (6, 1, 2, 3). When telephone
answered, it will playback message 3 and 4 by 2 times (3, 4)
LCD "MSG" : Message indicating on LCD
This system will leave warning message on LCD panel while sensors opened or triggered
or in low battery. It also emits 3 short 'Beep' at every 10 Secs to remind you in the
meantime, It can be stored first 5 messages and displayed on the LCD. If you want to
check or delete the MSG, the system need to be in disarm mode. LCD display shown as
below.
00 HOME SECURITY
Chime Disarmed
00 HOME SECURITY
Disarmed
16
phone 1 phone 2
phone 1 phone 2
phone 1 phone 2
MSG
phone 3,
phone 3,
phone 3,