Pipe Chase, Hoods And Seam Caps; Figure 54 - Base Rail Shipping Split Fastener Pack (P/N 386-03417-000); Figure 55 - Top Raceway Bracket Assembled (P/N 386-04747-000); Figure 56 - Neoprene Gasket - 1/4 In. X 2 In. X 25 Ft (P/N 028-15954-010) - Pace PAI Installation And Assembly Manual

PACE │ Installation & Assembly Manual
1/2 in. Nut
Baserail Lifting Lugs Assembled
Figure 54 - Base Rail Shipping Split Fastener Pack
(P/N 386-03417-000)
Raceway Lifting Lugs Assembled
1/2 x 5-1/2 in. Hex Cap Screw (2)
Lock Washer (2)
1/2 in. Hex Nut
Figure 55 - Top Raceway Bracket Assembled (P/N
386-04747-000)

Pipe Chase, Hoods and Seam Caps

Use the following parts to install the seam cap(s), pipe
chase(s), and hood(s) as shown in Figure 62 on page
45 through Figure 64 on page 45.
Figure 56 - Neoprene Gasket - 1/4 In. X 2 In. X 25 Ft
(P/N 028-15954-010)
Issue Date: 07/03/2018
1/2 x 5-1/2 in. Bolt
1/2 in. Lock 1/2 in. Flat
Washer Washer
LD11032a
0.56 in. ID x 1.38 in. OD
Flat Washer (2)
LD13349
LD116508
SECTION 3 - HANDLING, STORAGE, AND INSTALLATION
Figure 57 - Neoprene Gray Gasket - 1/4 In X 3/4 In X
35 Ft (P/N 028-11873-010) for Door
Figure 58 - Phillips Hex Head Screw
(P/N 021-32268-011) For Indoor Unit Seam Cap
Figure 59 - Hex Head Screw For Outdoor Roof Seam
Cap, Pipe Chase, and Rain Hood - 1/4 In-14 X 1 In
(P/N 021-30530-052)
Figure 60 - Butyl Tape - 3/16 In X 3/4 In X 40 Ft (P/N
013E-03327-010)
44
LD116510
LD116510
LD116513
LD116509
Form PA102.20-N1