PACE │ Installation & Assembly Manual
HEATING AND COOLING SYSTEM
Various types of heating and cooling may be applied,
which include:
• Hot water or steam coils
• Electric or fuel burner heat
• Factory mounted chilled water coils
• Direct expansion refrigerant coils
CLEANING
Various types opf cleaning include filters and UV lights.
FAN SECTION
REAR
LEFT HAND (LH)
COIL CONNECTION
RETURN AIR
LEFT
DRIVE HAND AND COIL HAND DETERMINED
BY FACING THE INLET SECTION
Figure 2 - AHU and Coil Hand Identification
Issue Date: 07/03/2018
HAND ORIENTATION
Coil connections and other components are located
and described as left or right hand. The proper orienta-
tion to describe the proper hand is when airflow is at
your back as shown in Figure 2 on page 16.
AHU IDENTIFICATION (ID)
Indoor and outdoor AHUs are labeled with the following
ID labels:
• AHU
• Skid
• Loose Components
Indoor AHUs are shrink wrapped with skid ID labels on
the outside of the wrapping and on each skid.
RIGHT
RIGHT HAND (RH)
COIL CONNECTION
16
SECTION 2 - PRODUCT DESCRIPTION
OUTSIDE AIR
INLET SECTION
FRONT
Form PA102.20-N1
LD08004