General Installation Information - Emerson Rosemount 1057 Quick Start Manual

Quick Start Guide
2

General installation information

1. Install the transmitter with a sun shield or out of direct sunlight and
areas with extreme temperatures.
2. Install the transmitter in an area where vibration and
electromagnetic and radio frequency interference are minimized or
absent.
3. Keep the transmitter and sensor wiring at least 1 ft (0.30 m) from
high voltage conductors. Be sure there is easy access to the
transmitter.
4. The transmitter is suitable for panel, pipe, or surface mounting. Refer
to
12
Dimensional drawings.
February 2022
Emerson.com/Rosemount