Emerson Rosemount 1057 Quick Start Manual page 14

Quick Start Guide
alarming is available only when a contacting conductivity measurement
board is installed.
3.2 Preparing conduit openings
There are six conduit openings in all configurations of the transmitter.
Note
Emerson fits four of the openings with plugs upon shipment.
Figure 3-1: Conduit openings
A. Front panel/keypad
B. Power leads
C. Alarm relay leads
D. Sensor 1 cable
E. 4-20 mA/HART
F. Sensor 2 cable
G. Spare opening
NOTICE
Always use proper cable gland fittings and plugs for wire and cable
installations.
14
® ®
/Profibus leads
February 2022
Emerson.com/Rosemount