Quick Start Guide
The Up key (above ENTER) increments numerical values, moves the
•
decimal point one place to the right, or selects units of measurement.
The Down key (below ENTER) decrements numerical values, moves the
•
decimal point one place to the left, or selects units of measurement.
The Left key (left of ENTER) moves the cursor to the left.
•
The Right key (right of ENTER) moves the cursor to the right.
•
During all menu displays (except main display format and Quick Start), the
live process measurements and secondary measurement values are
displayed in the top two lines of the upper display area. This conveniently
allows display of the live values during important calibration and
programming operations.
Menu screens time out after two minutes and return to the main display.
24
February 2022
Emerson.com/Rosemount