Table of Contents
Advertisement
3.5 Pulse Modulation Signal
The S1132 signal generator can output pulse modulation signals. The following example introduces the pulse
modulation signal with carrier frequency of 1GHz and amplitude of -10dBm.
Operation steps:
1. Instrument connection
Use a coaxial cable to connect the signal output end of the signal generator to the RF input port of the N9020A
spectrum analyzer.
2. Parameter setting
(1) Reset the signal generator
— Press【Preset】
(2) Parameter setting
— Press【FREQ】
Figure 3-9 Test result of the PSK modulation signal
button
button, input 1 GHz
Tel: 886. 909 602 109
25
Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
