Saluki S1132 Series User Manual page 7

or poor grounding may damage the signal generator and even cause personal injury. In order to prevent or reduce
the mutual interference caused by multiple devices through the power supply, especially the spike interference
generated by high-power devices may cause damage to the instrument hardware, it is best to use a 220V/110V AC
stabilized power supply to power the adapter.
1.3.2 Initial Power-up of the Signal Generator
1) Turn on the strong power switch at the back of the instrument, and the fan starts to run;
2) Turn on the front power control switch, and it takes about 30 seconds to start the instrument;
3) After the instrument is started up, it needs to be warmed up for 20 minutes before testing.
Power Parameter
Voltage
Frequency
Max. consumption
Tel: 886. 909 602 109
Range
100V - 240V
50Hz - 60Hz
20W
7
Email: sales@salukitec.com
www.salukitec.com