Saluki S1132 Series User Manual page 31

3.6.4 Sawtooth wave
For example: to output LF signal with frequency of 100kHz and amplitude of 1Vpp.
Operation steps:
1. Instrument connection
Use a coaxial cable to connect the LF output port of the signal generator to the channel 1 input end of the
MSO-X2020A oscilloscope.
2. Parameter setting
(1) Reset the signal generator
— Press【Preset】
(2) Parameter setting
— Press【AuxFctn】
— Select [LF OUT]
— Select [Wave]
— Select [Sawtooth]
Figure 3-13 Test result of the triangle wave signal
button
button
Tel: 886. 909 602 109
31
Email: sales@salukitec.com
www.salukitec.com