Saluki S1132 Series User Manual page 35

— Select [DRG]
— Select [State] -- "On"
— Select [Upper Limit], input 1 GHz
— Select [Points], input 100
— Select [Rate], input 0.1 μs
— Press【More】
— Select [Mode]
— Select [Bothway]
— Press【RF1】
— Press【MOD】
3. Test result
After setting the relevant parameters of the spectrum analyzer, the result is shown in Figure 3-17.
button
button, make the【RF1】button backlight bright
button, make the【MOD】button backlight bright
Figure 3-17 Test result of the DRG function
Tel: 886. 909 602 109
35
Email: sales@salukitec.com
www.salukitec.com