Saluki S1132 Series User Manual page 28

— Press【AuxFctn】
— Select [LF OUT]
— Select [Wave]
— Select [Sine]
— Select [Freq], input 100 kHz
— Select [AMPL], input 1 Vpp
— Press【LF】
3. Test result
After setting the relevant parameters of the oscilloscope, the result is shown in Figure 3-11.
3.6.2 Square wave
For example: to output LF signal with frequency of 20kHz and amplitude of 1Vpp.
Operation steps:
1. Instrument connection
Use a coaxial cable to connect the LF output port of the signal generator to the channel 1 input end of the
MSO-X2020A oscilloscope.
button
button, make the【LF】button backlight bright
Figure 3-11 Test result of the sine wave signal
Tel: 886. 909 602 109
28
Email: sales@salukitec.com
www.salukitec.com