Analog Modulation Signal - Saluki S1131 User Manual

row 2.
9) Set parameters in row 2 (1GHz/-10dBm/50ms), row 3 (2GHz/-20dBm/50ms), row 4 (2.15GHz/-30dBm/50ms)
10) Press 【RF】to enable the output..
11) Set the S3331 accordingly. Please see following screenshot

5.5 Analog Modulation Signal

S1131 supports analog modulation as a standard function, AM, FM, PM, Pulse modulation are supported. This example will
show how to set an AM output signal.
1) Connect S1131 to S3331 via a N type cable
2) Preset the S1131, S3331
Press【PRESET】 key . The instrument will return to default settings.

3) Frequency settings
Press 【FREQ】 key..

Use number keys, knob or up/down arrow key to set the center frequency to 100MHz

4) Amplitude settings
Tel: 886.2.2175 2930 Email: sales@salukitec.com
16
www.salukitec.com