Table of Contents
Advertisement
3.3.3 ФM
For example: phase offset 180°, modulation rate 100kHz
Operation steps:
1. Instrument connection
Use a coaxial cable to connect the signal output end of the signal generator to the RF input port of the N9020A
spectrum analyzer.
2. Parameter setting
(1) Reset the signal generator
— Press【Preset】
(2) Parameter setting
— Press【FREQ】
— Press【AMPT】
Figure 3-5 Test result of the FM modulation signal
button
button, input 1 GHz
button, input -10 dBm
Tel: 886. 909 602 109
18
Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
