Drg - Saluki S1132 Series User Manual

3.8 DRG

The S1132 signal generator has linear frequency modulation function.
Operation steps:
1. Instrument connection
Use a coaxial cable to connect the signal output end of the signal generator to the RF input port of the N9020A
spectrum analyzer.
2. Parameter setting
(1) Reset the signal generator
— Press【Preset】
(2) Parameter setting
— Press【AMPT】
— Press【AuxFctn】
Figure 3-16 Test result of the up-conversion function
button
button, input -10 dBm
button
Tel: 886. 909 602 109
34
Email: sales@salukitec.com
www.salukitec.com