Audio Induction Loops - signia Motion SP primax User Manual

Audio induction loops
Some telephones and public places like theatres offer the
audio signal (music and speech) via an audio induction
loop. With this system, your hearing instruments can
directly receive the desired signal – without distracting
noise in the environment.
You can usually recognize audio induction
loop systems by certain signs.
Ask your Hearing Care Professional to configure a
telecoil program.
X
Telecoil program and remote control
Signia Motion SP primax EN__COB.indd 27
Switch to the telecoil program whenever you are in a
place with an audio induction loop.
If a telecoil program is configured for your hearing
instruments, it is listed in section "Settings".
NOTICE
For instruments with wireless connectivity:
When the telecoil program is active, the remote
control may cause a pulsing noise.
Use the remote control with a distance greater
X
than 10 cm (4 inches).
27
10.05.2019 11:19:20