Changing The Hearing Program - signia Motion SP primax User Manual

Changing the hearing program

Depending on the listening situation, your hearing
instruments automatically adjust their sound.
Your hearing instruments may also have several hearing
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the program
change.
Additionally, your Hearing Care Professional can
configure the LED to indicate the program change: The
LED light flashes once if you change to program 1, twice
if you change to program 2, and so on.
X
Signia Motion SP primax EN__COB.indd 21
To change the hearing program, press the push button
briefly or use a remote control.
Refer to section "Controls" for the setting of your
controls. Refer to section "Settings" for a list of your
hearing programs.
If the AutoPhone or the TwinPhone function
is activated, the hearing program switches
automatically to a telephone program when the
telephone receiver is close to the ear.
Read more in section "On the phone".
Your Hearing Care Professional can configure
your hearing instruments so that they switch
automatically to the audio shoe program if the
audio shoe has been attached.
Read more in section "Audio input".
21
10.05.2019 11:19:18