signia Pure Charge&Go BCT IX Quick Start Manual

Quick Start Guide
Pairing Pure Charge&Go BCT IX
to an Android phone
Your hearing aids use two types of Bluetooth® connections.
• Bluetooth® LE is used to connect each hearing aid individually to the Signia app for
remote control adjustments. Pairing this connection is done through the Signia app.
• Bluetooth® Classic is used to connect your hearing aids jointly for streaming calls
and audio. Pairing this connection is done through your phone's Bluetooth menu.
Follow the simple steps below to pair both types of Bluetooth connections. These instructions
are intended as general guidance, as menu details may vary between different Android phones.
Step 1
Download the Signia app (version 2.7.0 or later).
Step 2
Ensure your phone's Bluetooth is turned on.
Note: If your hearing aids are already paired to another device nearby, turn off the Bluetooth® on that
other device during the pairing process.
Step 3
Open the Signia app.
Step 4
Tap the Bluetooth
pairing option.
Android is a trademark of Google LLC. The Bluetooth® word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such marks by WSAUD A/S is under license.
Restricted
Step 5
Turn your hearing aids
off and back on – this
will put them in pairing
mode for
approximately 3
minutes. Tap OK.
Step 6
When your hearing aids
appear, tap their name
to select.