Replacing Batteries - signia Motion SP primax User Manual

Replacing batteries
Removing the battery:
X
X
Inserting the battery:
X
X
X
Signia Motion SP primax EN__COB.indd 13
Open the battery compartment.
Pull the battery out.
If the battery has a protective film, remove it
only when you are ready to use the battery.
Slide the battery into the compartment.
Make sure the "+" symbols on the
battery and compartment are aligned
(refer to the picture).
A magnet in the battery compartment
ensures that the battery snaps
noticeably into place.
Carefully close the battery compartment. If you feel
resistance, the battery is not inserted correctly.
Do not attempt to close the battery compartment by
force. It can be damaged.
13
10.05.2019 11:19:07