Hitachi ZX200-5G Workshop Manual page 489

Installation
IMPORTANT: If a hammer is used to install the
bushing, the bushing may be damaged. Install the
bushing by using a press.
d
CAUTION: Bucket cylinder (1) weight: 160 kg
(355 lb)
d
CAUTION: Metal fragments may fly off when
a hammer is used. Wear necessary protection,
such as goggles, helmets, etc in order to prevent
personal injury.
1. Hoist bucket cylinder (1). Fit the hole at the cylinder
bottom side with the cylinder mounting hole on
the arm. Fit thrust plate (10) and pin (11) with the
cylinder mounting hole on the arm. Install pin (11)
by using a hammer.
2. Install bolt (15) to stopper (14) of the arm and pin
(11) with nuts (13) (2 used).
j : 24 mm
m : 80 N·m (8 kgf·m, 59 lbf·ft)
3. Connect hoses (12) (2 used) to bucket cylinder (1).
j : 36 mm
m : 180 N·m (18 kgf·m, 133 lbf·ft)
SECTION 5 FRONT ATTACHMENT
Group 2 Cylinder
W5-2-3-3
10
14
13
1
15
12
W187-04-02-004
11