Hitachi ZX200-5G Workshop Manual page 173

48. Connect ground (8) with washer (7) and bolt (6).
j : 17 mm
m : 20 N·m (2 kgf·m, 15 lbf·ft)
49. Install covers (5) (2 used) with washers (4) (4 used)
and wing nuts (3) (4 used).
50. Add coolant to the radiator.
51. Fill hydraulic oil to the hydraulic oil tank.
f
NOTE: Total oil amount of hydraulic oil tank: 201 L (53.1
US gal)
SECTION 3 UPPERSTRUCTURE
Group 4 Engine
112, 113, 114
WDCD-03-04-019
W3-4-1-17
52. Install O-ring (114).
53. Install the cover (113) assembly to the top of
hydraulic oil tank with bolts, washers (112) (6 used).
j : 17 mm
m : 50 N·m (5 kgf·m, 37 lbf·ft)
54. Bleed air from the fuel system. (Refer to W1-4-1.)
55. Bleed air from the hydraulic system. (Refer to W1-
4-1.)
IMPORTANT: Check the hydraulic oil level. Start the
engine and check for any oil leaks.
WDCD-03-04-009