Hitachi ZX200-5G Workshop Manual page 461

a
a - Stand
6. Set the angle between boom and arm to 90˚ to
110˚. Lower the boom with the round bottom of the
bucket contacting with the ground. Raise the track
frame and pull out the track. Place stand (a) under
the track frame and support the machine at this
time.
d
CAUTION: The track assembly weight:
ZX200-5G: 1260 kg (2780 lb)
ZX210H-5G, 210K-5G: 1330 kg (2940 lb)
ZX200LC-5G: 1350 kg (2980 lb)
ZX210LCH-5G, 210LCK-5G: 1420 kg (3140 lb)
7. Slowly operate a travel control lever on the side to
be removed the track to the reverse position and
extend the track.
SECTION 4 UNDERCARRIAGE
Group 6 Track
90˚~110˚
M104-07-067
W4-6-1-3
W105-03-07-011