Hitachi ZX200-5G Workshop Manual page 181

65 66
70 59 60 67 61
Installation
d
CAUTION: Oil cooler (71) weight: 26 kg (58 lb)
1. Install eyebolts (M8, Pitch 1.25 mm) (3 used) to
eyebolt mounting holes (c) (3 places) of oil cooler
(71). Attach nylon slings onto the eyebolts. Hoist oil
cooler (71).
2. Install oil cooler (71) with bolts, washers (70) (6
used).
j : 14 mm
m : 36 N·m (3.6 kgf·m, 26.5 lbf·ft)
3. Install shackles to lifting hole (b) of intercooler (69).
Attach nylon slings onto shackles. Hoist intercooler
(69).
SECTION 3 UPPERSTRUCTURE
Group 5 Radiator Assembly
71
A 63
62
64
68
WDCD-03-05-012
Detail A
63
69
a- Lifting Hole
b- Lifting Hole
c- Eyebolt Mounting Hole
4. Install intercooler (69) with collars (68) (2 used),
rubbers (66, 67), and bolts (65) (2 used).
j : 13 mm
m : 18 N·m (1.8 kgf·m, 13.5 lbf·ft)
5. Install packings (64, 63) (2 used for each) to radiator
(62).
6. Install shackles (2 used) to lifting holes (a) (2 places)
of radiator (62). Attach nylon slings onto shackles.
Hoist radiator (62).
7. Install radiator (62) with collars (61) (4 used), rubbers
(60) (4 used), and bolts (59) (4 used).
j : 13 mm
m : 18 N·m (1.8 kgf·m, 13.5 lbf·ft)
W3-5-1-7
c
a
b
WDCD-03-05-018