Hitachi ZX200-5G Workshop Manual page 180

65 66
70 59 60 67 61
29. Install shackles (2 used) to lifting holes (a) (2 places)
of radiator (62). Attach nylon slings onto shackles.
Hoist and hold radiator (62).
30. Remove bolts (59) (4 used), rubbers (60) (4 used),
and collars (61) (4 used). Remove radiator (62).
j : 13 mm
31. Remove packings (63, 64) (2 used for each) from
radiator (62).
j : 13 mm
32. Install shackles to lifting hole (b) of intercooler (69).
Attach nylon slings onto shackles. Hoist and hold
intercooler (69).
SECTION 3 UPPERSTRUCTURE
Group 5 Radiator Assembly
71
A 63
62
64
68
WDCD-03-05-012
Detail A
63
69
a- Lifting Hole
b- Lifting Hole
c- Eyebolt Mounting Hole
33. Remove bolts (65) (2 used), rubbers (66, 67), and
collars (68) (2 used). Remove intercooler (69).
j : 13 mm
d
CAUTION: Oil cooler (71) weight: 26 kg (58 lb)
34. Install eyebolts (M8, Pitch 1.25 mm) (3 used) to
eyebolt mounting holes (c) (3 places) of oil cooler
(71). Attach nylon slings onto the eyebolts. Hoist
and hold oil cooler (71).
35. Remove bolts, washers (70) (6 used). Move oil cooler
(71) to the radiator (62) side. Remove oil cooler (71).
j : 14 mm
W3-5-1-6
c
a
b
WDCD-03-05-018