Hitachi ZX200-5G Workshop Manual page 440

18. Fill part A of cylinder (00A) with grease.
19. Install piston rod (14) to cylinder (00A).
20. Bleed air from part A of cylinder (00A) and cylinder
(00A).
21. Install bracket (16) and valve (15) to piston rod (14).
j : 24 mm
m : 90 N·m (9 kgf·m, 66 lbf·ft)
22. Install washer (10) and bolt (09) to bracket (16).
j : 17 mm
m : 60 N·m (6 kgf·m, 44 lbf·ft)
SECTION 4 UNDERCARRIAGE
Group 4 Track Adjuster
A 00A
WDCD-04-04-014
W4-4-3-8