Table of Contents
Advertisement
EN
24
Maintenance
9. MAINTENANCE
Always pull the plug out of the power socket before doing any work on the chainsaw!
Keep the cooling vents on the motor housing clean and unobstructed at all times.
Only the maintenance work described in these operating instructions may be carried out. Any other
maintenance work must be carried out by our Customer Service.
Do not modify the power saw in any way as this could jeopardize its safety.
Should the chainsaw fail despite our careful manufacturing and inspection procedures, have it repaired by
an authorized Customer Service workshop.
Filling in chain oil
To prevent dirt getting inside the tank, clean the oil tank cap (21) before opening. Check the contents of the oil
tank during sawing work by checking the oil gauge (15). Close the oil tank cap tightly and wipe away any spills.
Sharpening the saw chain
You can have your saw chain sharpened fast and correctly by specialist dealers, from whom you can also obtain
chain sharpening equipment to enable you to sharpen the chain yourself.
Please follow the corresponding operating instructions.
Take care of your tools. Keep your tools sharp and clean to enable you to work well and safely.
Follow the maintenance regulations and the instructions for changing tools.
Service information
With this product, it is necessary to note that the following parts are subject to natural or usage-related wear, or
that the following parts are required as consumables.
Wearing parts*: Saw chain, guide rail, chain oil, carbon brushes, claw stop
* May not be included in the scope of delivery!
FZP 2025-E
Advertisement
Table of Contents
