Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fieldmann FZP 6005-E
Summary of Contents for Fieldmann FZP 6005-E
-
Page 1: Picture Annex
FZP 6005-E... - Page 3 FZP 6005-E...
- Page 5 FZP 6005-E...
- Page 7 FZP 6005-E...
- Page 9 0,6 mm FZP 6005-E...
-
Page 11: Table Of Contents
Table of contents Pole-Mounted Pruner OPERATING INSTRUCTIONS TABLE OF CONTENTS PICTURE ANNEX GENERAL SAFETY REGULATIONS Important safety notices Packaging Instructions for use SYMBOLS MACHINE DESCRIPTION AND PACKAGE CONTENT SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WHEN WORKING WITH POLE-MOUN- TED PRUNER POLE-MOUNTED PRUNER ASSEMBLY SAWCHAIN TENSIONING ADJUSTING SAWCHAIN TENSION ADJUSTING CHAINSAW HEAD ANGLE... -
Page 12: General Safety Regulations
Adherence to the attached instructions for use is a precondition for the proper use of the machine. The operation manual includes also instructions for operation, maintenance and repairs. The manufacturer does not take any responsibility for accidents or damages resulting from the failure to adhere to this manual. FZP 6005-E... -
Page 13: Symbols
Symbols 2. SYMBOLS Do not expose the tool to rain. Before using the tool, read carefully this operating manual. If the power cord is damaged, immediately unplug the tool. Always use hard hat, goggles and hearing protection while working. Danger of fatal injury caused by electric shock! Maintain distance of at least 10 m from overhead electrical power lines... - Page 14 Symbols DANGER! Do not start the tool if there are children, bystanders or animals near you. Use protective gloves while working. Use solid insulated working footwear. Use ear protection. Wear work gloves. Beware of falling branches. FZP 6005-E...
-
Page 15: Machine Description And Package Content
Machine description and package content | Safety instructions 3. MACHINE DESCRIPTION AND PACKAGE CONTENT Machine Description (see Fig. 1) Scabbard Clamp Chainsaw Handle Guide bar Switch Drive Plug Adjusting button Guide bar Connecting handle Saw chain Connecting collar Adjusting hole Arresting element Guide bar bolt Arresting element... -
Page 16: Electrical Safety
A moment of inattention while operating power tools may result in serious personal injury. Use personal means of protection. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used in conformity with the working conditions will reduce personal injuries. FZP 6005-E... - Page 17 Safety instructions Avoid accidental starting. Ensure the switch is in the off-position before connecting the battery, storing or carrying the power tool. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusting tools or wrenches before turning the power tool on.
-
Page 18: Safety Instructions When Working With Pole-Moun
While cutting, prevent movement of persons near the chain saw. Ensure safe movement of persons in sufficient distance from the cutting point. FZP 6005-E... -
Page 19: Pole-Mounted Pruner Assembly
Safety instructions | Safety instructions when working with pole-mounted pruner Pole-mounted pruner assembly Do not use the chain saw near cable, power and telephone lines. Maintain distance of at least 10 m from all electrical power lines while working with a chain saw. 6. -
Page 20: Sawchain Tensioning
Carefully adjust the chain to prevent overtensioning. Overtensioning of the chain causes excessive wear and tear and reduces the lifetime of both the guide bar and the chain. After tensioning the chain, re-tighten the adjusting bolt of the guide bar (see Fig. 7) FZP 6005-E... -
Page 21: Adjusting Chainsaw Head Angle
Adjusting chainsaw head angle | Adjusting telescopic pole length Operating the pole-mounted pruner 9. ADJUSTING CHAINSAW HEAD ANGLE (Fig. 9) The chainsaw head can be adjusted up to 3 different working angles. 0 degrees, 15 degrees and 30 degrees. With one hand press the adjusting button PUSH and turn the trimmer head into the desired position. -
Page 22: Tool Cleaning And Maintenance
Before chain sharpening, always check the state of the guide bar. Using worn out or damaged guide bar is very dangerous. Using worn out or damaged guide bar will result in chain damage. Cutting using such tool will also be significantly more difficult and laborious. FZP 6005-E... -
Page 23: Sawchain Sharpening
Tool cleaning and maintenance | Sawchain sharpening Regular maintenance of the guide bar Dismantle the guide bar (19) from the chainsaw body. Regularly remove wood dust from the guide bar groove. While cleaning, use a scraper (29) or a wire (see Fig. 13). At the end of each working day, clean the oil grooves (30). - Page 24 (see Fig. 16). Note: After a few manual sharpening hand the saw chain for sharpening to an authorised service centre or sharpen it using a special sharpening machine. This way you will restore even sharpening of all teeth. FZP 6005-E...
-
Page 25: Sawchain Replacement
Sawchain replacement 14. SAWCHAIN REPLACEMENT ATTENTION! When replacing the saw chain, do not fix the chainsaw or the guide bar into the chops. Always replace the chain if the teeth are excessively worn out or cannot be sharpened or if the chain breaks. -
Page 26: Storage
< 2,5 m/s square acceleration Total length 2,3 m -2,9 m Cutting length 250 mm Weight 3,5 kg Sound power level LWA measured 99 dB(A)/guaranteed 102 dB(A) Container capacity 100ml The User’s Manual is in a specific language version. FZP 6005-E... -
Page 27: Declaration Of Conformity
Declaration of conformity 17. DECLARATION OF CONFORMITY Product / brand: POLE MOUNTED PRUNER ELECTRICAL / FIELDMANN Type / model: FZP 6005-E ................230V, 600W, 50Hz, Class II The product is inline with regulations listed below: EC Directive for Noise 2000/14/ES EC Council Directive 2006/42/EC Machinery EC Directive for Electromagnetic Compatibility (EMC) No.2004/108/EC... -
Page 28: Disposal
This product fulfils all basic requirements of the EU directives that apply to it. Text, design and technical specifications can change without prior notice and we reserve the right for their change. FZP 6005-E...