EN
18
Cutting | Cleaning and maintenance
Log above the ground
In part "A" make a cut from below to a third of the
log and then complete the cut from above. In part
"B" make a cut from above to a third of the log and
then complete the cut from below.
Removing a fallen tree
First fi nd out to which side the branch is bent. Then
make the initial cut from the side of the bend and
then complete the cut from the opposite side.
ATTENTION! A bent branch may spring up.
11. CLEANING AND MAINTENANCE
ATTENTION! Prior to cleaning, inspecting or repairing the chain saw, its engine must be turned off and
cold and the spark plug must be removed to prevent accidentally starting the engine.
Maintenance after every use
Remove the guide bar and use a brush to clean away accumulated sawdust from the entire chain saw. Use
a spatula or screwdriver to remove stubborn dirt.
B
A
1
2
2
1
1
2
FZP 5216 B