Sensor Adjustment; Changing Swing; Increasing Or Decreasing Voltage - Headsight CORN VENCE TUDO Instruction Manual

Sensor Adjustment

Insert header stop to prevent movement.

Changing Swing

1. Loosen the bolt A holding downstop.
2. Slide the downstop to new position in slotted hole.
•
Raising downstop will increase voltage swing
and allow higher maximum cutting height
•
Lowering the downstop will decrease total voltage
swing and help prevent arm from stabbing
the ground when the headers is lowered

Increasing or Decreasing Voltage

1. Loosen sensor mounting nuts B.
2. Twist the sensor to new position using
the slotted mounting holes.
•
Twisting sensor clockwise will lower voltage
•
Twisting sensor counterclockwise will increase voltage
3. Re-tighten the nuts B.
A
B B
07