Advertisement
Overview
Refer to the following environmental and power specifications:
Specifications
Voltage
Current Draw
Temperature
Humidity
Overview
The remote display assembly (RDA) is a surface-mounted version of the Flexible User Interface. The
unit is mounted remotely from the FACP and wired back to it via remote unit interface (RUI) wiring.
Since the printed circuit boards and LCD are factory-installed within the RDA enclosure, hardware
installation consists of surface mounting the enclosure to the wall, and completing the RUI circuit
connection. The 4100-9401 Flexible User Interface remote display assembly contains the following:
•
Flexible User Interface panel assembly
•
566-141 transponder interface card (TIC)
•
Remote box 13"X20.5"
FLEXIBLE USER
INTERFACE PANEL
ASSEMBLY
24V
186 mA Normal Standby
214 mA alarm
o
32 to 120
F (0 to 49
Up to 93% (non-condensing) relative humidity at 90
TRANSPONDER INTERFACE
CARD
Figure 1. 4100-9401 Flexible User Interface Remote Display Assembly
firealarmresources.com
o
C)
REMOTE BOX & DOOR
2
o
o
F (32
C)
Advertisement
