Fv (Firmware Versions) - NEC Express5800 1160Xd User Manual

FV (Firmware Versions)

This command displays the version information of the iSPFW and BIOS. The command
performs a checksum of the storage area. It is managed independently in each iSP if the
iSP is redundant.
Screen Image
iSPyz:---> fv<ENTER>
Firmware Versions : (currently running firmware is iSP FW bank1)
iSP BOOT
iSP FW bank0
iSP FW bank1
BIOS bank0
BIOS bank1
Do you want to check the flash memory? (y/[n]) : y<ENTER>
checking iSP BOOT bank...
passed.
checking iSP FW bank0...
passed.
checking iSP FW bank1...
passed.
checking BIOS bank0...
passed.
checking BIOS bank1...
passed.
FV command terminated.
Reference
A
B
C
3-32 Service Processor
Table 3-32. FV Screen
(*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
: xx.xx generated on mm/dd/yyyy hh:mm:ss
(*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
(01 45 ) : xx.xx generated on mm/dd/yyyy hh:mm:ss
PAL_Axx.xx
( 23 67) : xx.xx generated on mm/dd/yyyy hh:mm:ss
PAL_Axx.xx
Table 3-33 FV Screen References
Description
Displays the state of the current FW storage area.
To perform a checksum test of the storage area, enter "y".
Displays the state of the checksum test.
NML MNT
X X
PAL_Bxx.xx SALxx.xx
PAL_Bxx.xx SALxx.xx
m b u
X X X
Reference
A
B
C