Download Print this page

Briggs & Stratton 2691218-00 Manual page 16

Advertisement

Reverse Mowing Option (RMO)
WARNING
Mowing in reverse can be hazardous to bystanders.
Tragic accidents can occur if the operator is not alert to the
presence of children. Never activate the RMO if children
are present. Children are often attracted to the unit and the
mowing activity.
The Reverse Mowing Option (RMO) allows the operator to
mow in reverse (see Features and Controls). To activate,
turn the RMO key after the PTO is engaged. The L.E.D. light
will illuminate, and the operator can then mow in reverse.
Each time the PTO is engaged the RMO needs to be
reactivated if desired. The key should be removed to restrict
access to the RMO.
Pushing the Tractor by Hand
1. Disengage the PTO and turn the engine off (see
Features and Controls).
2. Pull out the lever approximately 2-3/8 in. (6 cm) to
release the transmission (see Figure 6).
3. The tractor can now be pushed by hand.
WARNING
Towing the unit will cause transmission damage.
Do not use another vehicle to push or pull this unit. Do not
actuate the transmission release lever while the engine is
running.
Adjusting the Mower Cutting Height
Use the mower cutting height adjustment lever to raise or
lower the cutting height (see Features and Controls).
The cutting height has seven positions between 1.5 and 4.0
in. (3,8 and 10,2 cm).
16
Parking Brake
Use the parking brake control to engage or disengage the
parking brake when the tractor is stopped (see Figure 7).
Engage the Parking Brake - To engage the parking brake,
fully depress the brake pedal (A), pull UP on the parking
brake control (B), and release the brake pedal.
Disengage the Parking Brake - To disengage the parking
brake, fully depress the brake pedal (A), press DOWN on
the parking brake control (B), and release the brake pedal.
Cruise Control
TO ENGAGE:
1. Pull up on the cruise control knob (C, Figure 7).
2. Depress the forward ground speed pedal (D).
3. Lift up the cruise control knob when desired speed is
reached. The Cruise will lock in one of its five locking
positions.
TO DISENGAGE:
1. Depress the brake pedal (A, Figure 7).
OR
2. Depress the forward ground speed pedal (D).
Stopping the Tractor and Engine
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
• Do not choke the carburetor to stop the engine.
1. Release the ground speed pedals to return to the
NEUTRAL position (see Features and Controls).
2. While still on the lawn, disengage the PTO switch, then
wait for all moving parts to stop.
3. Move the throttle control (or throttle/choke control)
to SLOW position and turn the ignition key to OFF.
Remove the key.
4. Engage the parking brake. Fully depress the brake
pedal, pull UP on the parking brake control, and release
the brake pedal.
In the event of an emergency the engine can be
stopped by simply turning the ignition switch to STOP.

Advertisement

loading