Table of Contents
Advertisement
4 Software Overview | 4.3 Basic Software Functions
Workspace Zoom Use the zoom slider to vary the element size within the workspace between 70%
Workspace Save and reload all your personal settings as a workspace configuration.
78
Tool Bar
3
Allows you to save, open and search for files
Left Tool Area
4
Contains tabs that are organized according to the current workflow.
Each tab contains tool windows that allow you to control the most
important functions of the microscope.
Center Screen Area
5
Displays images (live images or acquired snapshots).
This area is also used to register specimens.
Status Bar
6
Shows various parameters that inform you about the system status
Workspace Configuration Area
7
Allows you to configure the workspace and to save and load workspace
configurations
Right Tool Area
8
Contains the image library, a small image of the chamber camera, and a
list of the most recent experiments
4.3 Basic Software Functions
|
4.3
Basic Software Functions
ZEN MultiSEM allows you to adjust the user interface according to your
requirements or to your favored settings.
4.3.1 Workspace Configuration Area
The Workspace Configuration Area allows you to configure your workspace, as
well as to save and load your personal settings as a workspace configuration.
Fig. 4.2: Workspace Configuration
and 150% of the original size.
Click Reset to reset the zoom to default (100%).
Design Select Light or Dark design to adapt the user interface to the lighting conditions in
your laboratory.
Light is recommended for daylight conditions, Dark for low light conditions.
Quickly load previously saved workspace configurations using the dropdown menu.
Instruction Manual ZEISS MultiSEM 505/506 Series | ZEN MultiSEM v1.5
Advertisement
Table of Contents
