Display And Control Panel Handling; General Functions - Zeiss OPMI Lumera T Instructions For Use Manual

Operation

Display and control panel handling

General functions

Basic mode
Halogen
1
1.5
2
1.5
USER
1
MODE STORE MANUAL
Xenon
1
1.5
Xe
USER
1
STORE MANUAL
MODE
Xenon with
halogen (option)
1
1.5
2
1.5
USER
1
STORE MANUAL
MODE
Page 174
Operating keys "∇" and "Δ"
The keys "∇" and "Δ" are always assigned to the display field on their left.
Every time you press the "∇" key, the displayed value is decremented in
predefined steps down to a certain minimum.
Every time you press the "Δ" key, the displayed value is incremented in
predefined steps up to a certain maximum.
The keys "Δ" and "∇" have a repeat function. If f you hold down one of these
keys, the relevant value is automatically incremented or decremented by the
predefined steps until the maximum or minimum value is reached.
Operating key row
"MODE" key
Use the "MODE" key to switch from basic mode to speed mode. When in
speed mode, use the "MODE" key to switch back to basic mode.
The "MODE" key also permits you to switch from the configuration modes
back to the basic mode.
"STORE" key
The "STORE" key permits you to save the selected settings for a specific user.
"MODE" key and "STORE" key
Press the "MODE" and "STORE" keys simultaneously to switch from basic
mode to configuration mode 1. When one of the configuration modes is
active and you press the "MODE" and "STORE" keys simultaneously, you will
switch to the next configuration mode. From the last configuration mode you
switch back to configuration mode 1.
After switching to any other mode, the system returns to basic mode
20 seconds after you have stopped pressing any keys on the control panel.
S88 / OPMI Lumera T
Version 8.0
G-30-1682-en