Start Software - Zeiss LSM 510 Quick Start Manual

2. Start software

•
Log on to Win2000 (you will be issued with a username and password during
training). Change your password now if you have not already done so.
•
If you are using the UV laser, start this no before starting the LSM software.
•
Double click the LSM 510 desktop icon.
•
The Zeiss LSM 510 switchboard window will appear
•
Make sure Scan New Images is
pressed and then click the Start
expert mode button. If Scan
New Images is not pressed, the
software will start but no initialize
the hardware.
•
You will get an error message. Ignore it. It's just
telling you the UV laser is not switched on. Contact
facility staff if you require the UV laser. Press
Cancel to close the window.
4