Database Restore; Database Merge; Upgrade System (Software) - Zeiss Humphrey matrix User Manual

DATABASE RESTORE

To restore a database backup of the testing database from either a floppy disk or a CD-R media:
1. Place either a floppy in the floppy drive or a CD-R in the CD-R/W drive.
2. Select the appropriate drive from the Source pull down menu (click on the arrow).
3. Select the Begin Button.
Note: If Conflict Resolution is set to Manual and there are two of the same test from the same
time for a patient where the user entered information is not the same, one in the database and
one on the restore medium, then the operator will receive a prompt to decide which results are
placed in the database.

DATABASE MERGE

The user can merge matrix databases (full or partial) from multiple Matrix instruments into one
instrument if desired. If more then one instrument is in use at the same location or practice, it is
a good idea to merge / synchronize the databases.
1. Using the backup procedure described above, backup the database from each Matrix
instrument on separate floppy disk(s) or CD-R media.
2. Place either the floppy or CD-R used to backup the database of one unit into the drive of the
other unit.
3. Use steps 2 and 3 from the database restore instructions to load the database of the first unit
onto the second.
4. Repeat steps 1 through 3 until all units are synchronized.

UPGRADE SYSTEM (SOFTWARE)

This instrument is designed with the ability to upgrade the operating software using the CD-R/W
or floppy drives. Select the appropriate Source media and select the Begin Button in the
Upgrade System section of the File Functions Screen to upgrade the instrument software.
Reference the software upgrade instructions provided with the upgrade for details. The Help
(F6) Screen will identify which versions of the Humphrey Matrix software are installed.
32 Humphrey Matrix Visual Field Instrument
Rev. D 08/21/06 PN 701692