Table of Contents
Advertisement
Device overview
Button functions of the HD video control units
Page 76
Depending on the integrated video camera selected, the supply unit contains
different video control units:
For the integrated SD video camera
–
Integrated HD 720p control unit
–
Integrated video camera live & streaming control unit with SW
recording license (optional SW license)
The area to the right of the dashed line is displayed with a 90° rotation.
It is located at the level of the connector panel.
1 Config
Use the <Config> key to go to the menu.
The configuration menu permits you to set various function sequences
to meet your specific needs. The different possible settings in the
configuration of the application program are explained in the chapter
"Operation" (Page 127). The camera is delivered with a default
configuration (factory settings).
2 Indicator light (integrated HD 720p control unit)
The indicator light (LED) is lit when the power switch has been turned on.
3 Indicator lights (integrated video camera live & stream control unit)
The control light "Power" is illuminated when the main power switch is
switched on,
the control light "Network" flashes when data is being transmitted in the
network,
the control light "Record" is illuminated during video recording.
4 White bal
White balancing for the integrated HD 720p control unit (Page 164)
and for the integrated video camera live & streaming control unit
(Page 183)
5 Brightness (integrated HD 720p control unit)
You can use the
image.
The configuration menu (Page 140) gives you the choice between three
different modes: Automatic - Manual.
6 Brightness (integrated video camera live & streaming control unit)
Use the <Brightness> key to go to the "Brightness" menu (Page 140)
where you can configure settings.
and
keys to adjust the brightness of the video
S100 / OPMI pico
Version 9.0
G-30-1781-en
Advertisement
Chapters
Table of Contents
