Unpacking And Installing The Instrument - Leica VT1000 S Instruction Manual

4. Installation
4.2

Unpacking and installing the instrument

1
Fig. 12.1
2
3
Fig. 12.2
12
If at all possible the instrument should be installed on a low-vi-
bration workbench surface.
Unpacking the instrument:
- Open the transport box and carefully remove all the parts from the
box.
- Compare with the attached pack list to make sure the delivery is com-
plete.
- Connect the drain tube (Fig. 13.1) of the cooling bath at the underside
of the instrument (1).
- Ensure that the loose end of the drain tube is closed tightly with the
matching stopper.
- Secure the loose end of the drain tube in the holder at the rear of the
instrument (2).
Mounting the magnifier:
- The magnifier carrier is packed separately.
- Attach it to the instrument as shown in Fig. 11.2.
- Connecting the optional foot switch:
- Plug in the foot-switch into the 9-channel plug (3) at the rear of the
instrument.
Instruction Manual V 1.6 – 11/2007