Table of Contents
Advertisement
3
Installation
3.
Installation
3.1
Unpacking instructions
Warning
When the instrument is delivered, check the packaging first. Check the shipment for possible damage
and note this on the shipping documents if necessary.
Fig. 1
Fig. 3
1. Carefully cut through the adhesive tape at the indicated locations
2. Remove the provided bag with documents (including the User Manual etc.) and replacement
fuses.
3. Then carefully take the control unit
4. Unpack the forceps
5. Unpack the cable loom provided and select the cable for the country of use.
10
ò
ð
(→ Fig. 3)
(→ Fig.
3).
Fig. 2
(→ Fig.
out of the packaging.
1).
Version 1.5, Revision H
Advertisement
Table of Contents
