Exploring Flashprint - FLASHFORGE 3D PRINTER Dreamer NX User Manual

6.2 Exploring FlashPrint

6. 2.1 Machine Type Selection
Note! After starting FlashPrint, you need to select the target machine type first.
When you start FlashPrint, a dialog box will pop up. Just need to select
FlashForge Dreamer NX in the machine type list and click [OK]. You can also
change the machine type via clicking
graphic 6-2:
6.2.2 FlashPrint Menus
Load files.
Enter the support edit mode
View FlashPrint home screen from one of six viewing angles.
Dreamer NX User Guide | www.flashforge.com
[Print]--[Machine
6-2
6-3
type]. Please see
30