Chapter 3. Unpacking - FLASHFORGE 3D PRINTER Dreamer NX User Manual

Chapter 3. Unpacking

This chapter will present you the whole unpacking procedure of Dreamer NX
3D printer. (Note: Make sure you read the whole unpacking guide)
（3-1）Put Dreamer NX package on the clean, tidy workbench, using a knife
1.
to cut the tape, then you can see a quick start guide, a leveling card and two
build tapes. Please read the quick start guide first and start your 3D printing
journey with your Dreamer NX 3D printer.
2. （ 3-2 ） Remove the top protective foam pieces, which also houses the
DreamerNX's lid and put them aside. The Dreamer NX unit and a power cable
will be exposed.
3. 3-3 Firmly grasp the two side handles of FlashForge Dreamer NX. Lift it
（ ）
out of the box and place it on a stable surface. Then you will see the
Dreamer NX User Guide | www.flashforge.com
3-1
3-2
Tool Bag
15