Installing Filament - FLASHFORGE 3D PRINTER Dreamer NX User Manual

tighten the screws .

4.2 Installing Filament

(4-4) Lock the filament in place with the filament spool holder and turn the
filament spool counter-clockwise.
(4-5) Insert the filament through the filament guide tube. Attach the guide tube
into the two filament guide tube buckles.
(4-6) Stick the build tape to the build plate after installing filament, as picture
Dreamer NX User Guide | www.flashforge.com
4-4
4-5
4-6
shows.
20