FLASHFORGE 3D PRINTER Dreamer NX User Manual page 43

(5-7) Click[Edit], then you can add or remove a height.
6.2.12 File Menus
New Project
①
Click [File]--[New Project]
modification on previous project, then it will inform you whether the
modification needs to be saved or not. Click
click [No] will abandon it. If click
new project.
Saving
②
After finishing the model edit and adjustment, there are two ways below to
save all models in the scene.
Method 1:
Click [File]--[Save Project]
with the ".fpp" suffix, all models in the scene (include support) are independent.
After reloading the files, extruder configuration information and model position
will be the same as the configuration during saving.
Dreamer NX User Guide | www.flashforge.com
6-15
can build a blank project. If there is an unsaved
[Cancel] or close tool tip, then it will cancel the
6-16
in the menu bar to save the file as a project file
[Yes] will save the modification;
44